Tracker 4WD V6-2.5L VIN 4 (2001)
11. Beginning at the rear of the headlining (2), pull down slightly and cut through the beads of adhesive (1) with a utility knife (3) in order to unsecure
the headlining (2).
12. Lower the headlining trim finish panel (2) and position on the top of the front and rear seat back cushions.
13. Remove the rear window washer nozzle hose (1) from the headlining trim finish panel (2).
14. Remove the interior lighting wiring harness (3) from the headlining trim finish panel (2).
15. Remove the headlining (2) from the vehicle by removing through the rear door.
Installation Procedure
1. Install the headlining trim finish panel (2) to the vehicle by installing through the rear door.
2. Route and tape the interior lighting wiring harness (3) to the headlining trim finish panel (2).
3. Route and tape the rear window washer nozzle hose (1) to the headlining trim finish panel (2).
4. Apply several beads of adhesive to the roof panel in order to secure the headlining (2) to the panel.
