Tracker 4WD V6-2.5L VIN 4 (2001)
Brake Pedal Assy: Service and Repair
Manual Transmission
Brake Pedal Replacement (Manual Transmission)
Removal Procedure
1. Remove the clutch pedal (13).
2. Remove the brake pedal return spring (8) from the clutch pedal shaft.
3. Inspect the return spring for distortion or weakness. Replace the return spring if necessary.
4. Remove the brake pedal (9) from the clutch pedal shaft.
5. Inspect the brake pedal for distortion or damage. Replace the brake pedal it necessary.
Installation Procedure
