chevrolet Workshop Repair Guides

Chevrolet Tracker 4WD V6-25L Workshop Service and Repair Manuals

Brakes - Pulsation/Vibration|Page 5915 > < Brakes - Pulsation/Vibration|Page 5913
Page 3
background image

18.

Before installing the drum, measure the outer diameter of the brake shoes (3). The outer diameter of the brake shoes should be between 219.4 mm
(8.638 in) and 219.7 mm (8.650 in). If the outer diameter of the brake shoes is not within specification, turn the adjuster (2) in order to adjust the
outer diameter of the shoes.

19.

Clean the brake drum with brake cleaner, P/N 12378392 (in Canada, use P/N 88901247) or equivalent and install the drum.

20.

Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels (SI Document ID # 800565).

21.

Lower the vehicle.

22.

Press the brake pedal 3-5 times before starting the vehicle.

23.

Road test the vehicle.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

Brakes - Pulsation/Vibration|Page 5915 > < Brakes - Pulsation/Vibration|Page 5913