Tracker 4WD V6-2.5L VIN 4 (2001)
Brake Drum: Service and Repair
Brake Drum Replacement
Brake Drum Replacement
Removal Procedure
1. Release the park brake.
2. Remove the 4 screws (1, 3, 4, 6), the 2 clips (2, 5), and lift up the console.
3. Loosen the parking brake cable lock nut (2).
4. Raise and support the vehicle Refer to Vehicle Lifting.
5. Remove the tire and wheel assembly.
6. Remove the locking washers from the wheel studs.
7. Remove the drum (1) from the axle hub. If the drum cannot be removed by hand, install two 8 mm bolts (2) into the drum. Tightening the bolts
