Tracker 4WD V6-2.5L VIN 4 (2001)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement
Left Rear
Park Brake Cable Replacement - Left Rear
Removal Procedure
1. Verify the park brake lever is in the released position.
2. Remove the 4 screws (1,3,4,6), the 2 clips (2,5), and lift up the console.
3. If the vehicle has an automatic transmission, disconnect the power neutral switch connector.
4. If the vehicle has an auxiliary power outlet, disconnect the auxiliary power outlet connector.
5. Disconnect the park brake switch connector (10).
