Tracker 4WD V6-2.5L VIN 4 (2001)
13. Connect the park brake switch connector (10).
14. Adjust the park brake system. Refer to Park Brake Adjustment.
15. Position the console over the shift knob.
16. If the vehicle has an auxiliary power outlet, connect the auxiliary power outlet connector.
17. If the vehicle has an automatic transmission, connect the power neutral switch connector.
18. Install the console. Install the 4 screws (1,3,4,6) and the 2 clips (2,5).
Right Rear
Park Brake Cable Replacement - Right Rear
Removal Procedure
1. Verify the park brake lever is in the released position.
2. Remove the 4 screws (1,3,4,6), the 2 clips (2,5), and lift up the console.