Tracker 4WD V6-2.5L VIN 4 (2001)
13. Remove the following components:
^
The upper return spring (1)
^
The strut
^
The adjuster (2)
^
The adjuster lever
^
The adjuster spring (5)
^
The strut spring (3)
^
The pawl lever (6)
14. Remove the lower return spring (4)
15. Disconnect the park brake cab e (3) from the park brake shoe lever.
Important: The color ring on the park brake cable is for identification.
16. Squeeze the park brake cable stopper ring (2) in order to remove the cable (3) from the backing plate (1).
17. Remove the 3 park brake retainer bolts and the 3 park brake retainers.
18. Remove the park brake cable and the grommet from the vehicle.
Installation Procedure
1. Install the park brake cable and the grommet to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.