Tracker 4WD V6-2.5L VIN 4 (2001)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement
Front
Wheel Speed Sensor Replacement - Front
Removal Procedure
1. Raise and support the vehicle on a suitable hoist. Refer to Vehicle Lifting.
2. Disconnect the front wheel speed sensor electrical connector.
3. Remove the retaining bolt (3).
4. Remove the front wheel speed sensor (1) from the steering knuckle (2).
5. Remove the front wheel speed sensor, sensor harness (2), and harness bracket (1) from the vehicle.
Installation Procedure