Tracker 4WD V6-2.5L VIN 4 (2001)
Thermostat: Service and Repair
Removal Procedure
Caution: Refer to Radiator Cap Removal Caution in Service Precautions.
1. Drain the engine coolant.
2. Remove the lower radiator pipe bolt (1).
3. Remove the thermostat cap bolts (1), cap (2) and the thermostat.
Installation Procedure
Important: Align the thermostat air bleed valve (1) to the recession on the thermostat case (2).
1. Position the new thermostat and O-ring on the thermostat case.
Notice: Refer to Fastener Notice in Service Precautions.
