Tracker 4WD V6-2.5L VIN 4 (2001)
Water Pump: Service and Repair
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the negative battery cable.
2. Drain the engine oil.
3. Drain the engine coolant.
4. Remove the engine front cover.
5. Remove the water pump bolts (1) and the water pump (2)
Installation Procedure
1. Install new O-rings (1) to the water pump (2).
Notice: Refer to Fastener Notice in Service Precautions.