Tracker 4WD V6-2.5L VIN 4 (2001)
Camshaft: Service and Repair
Camshaft Replacement-Left
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the engine front cover.
3. Remove the spark plugs.
4. Remove the left secondary timing chain.
5. Remove the Camshaft Position (CMP) sensor.
6. Loosen the camshaft bearing caps in sequence.
7. Remove the camshaft bearing caps.
8. Remove the camshafts.
Installation Procedure
1. Verify that the keyway on the crankshaft (2) is properly positioned.
2. Apply engine oil to the camshaft journals and lobes.