Tracker 4WD V6-2.5L VIN 4 (2001)
3. Apply engine oil to the valve stem. Install the valve.
Important: Both the inner and outer valve springs have a top (large-pitch) and bottom (small pitch) end. Install the small-pitch end toward the valve
spring seat.
4. Install the springs.
5. Install the retainer.
Caution:
-
Wear safety glasses in order to avoid eye damage.
-
Compressed valve springs have high tension against the valve spring compressor. Valve springs that are not properly compressed by or
released from the valve spring compressor can be elected from the valve spring compressor with Intense force. Use care when
compressing or releasing the valve spring with the valve spring compressor and when removing or installing the valve stem keys. Failing
to use care may cause personal Injury.
6. Compress the valve spring using the J 8062 and the J 37979
7. Install the valve keepers.
8. Slowly release the J 8062 from the valve/spring assembly.
