Tracker 4WD V6-2.5L VIN 4 (2001)
Tighten the 2 bolts to 80 Nm (57.5 ft. lbs.).
8. With the latch (2) of the tensioner adjuster returned and the plunger (1) pushed back into the body, insert a retainer (4) (paper clip or similar tool)
into the set hole (3). After inserting the pin, make sure the plunger will not come out.
9. Install the timing chain tensioner (3). Secure with the bolt (1).
Tighten the bolt to 12 Nm (8.5 ft. lbs.).
10. Install tensioner nut.
Tighten the nut to 45 Nm (32.5 ft. lbs.).
11. Install tensioner nut.
Tighten the nut to 45 Nm (32.5 ft. lbs.).
12. Remove the retainer (2) from the tensioner.
13. Install the upper chain guide. Secure with the 3 bolts.
Tighten the bolts to 11 Nm (7.5 ft. lbs.).
