Tracker 4WD V6-2.5L VIN 4 (2001)
6. Install the camshaft bearing cap pins (2)
7. Install the camshafts with the timing chain to the cylinder head.
8. Apply oil to the camshaft bearing cap bolts.
Important: Cylinder head and camshaft damage may result if the bearing caps are incorrectly installed.
9. Install the camshaft bearing caps. The caps are marked intake or exhaust (1), position away from the timing chain (2), and direction toward the
timing chain (3).
10. Tighten the camshaft bearing caps.
Tighten the camshaft bearing caps in 3 progressive steps in the sequence shown to 12 Nm (8.5 ft. lbs.).
