Tracker 4WD V6-2.5L VIN 4 (2001)
7. Remove the fresh/recirc control cable (1) at the blower case.
8. Disconnect the A/C switch connector (1), if equipped.
9. Remove the IP cluster trim bezel.
10. Pull the knobs (1) from the levers.
7. Remove the fresh/recirc control cable (1) at the blower case.
8. Disconnect the A/C switch connector (1), if equipped.
9. Remove the IP cluster trim bezel.
10. Pull the knobs (1) from the levers.