Tracker 4WD V6-2.5L VIN 4 (2001)
Brake Lamp: Service and Repair
TAIL LP ASSY &/OR BACKUP, SIDEMARKER, STOP, TURN SIG BULB REPLACEMENT
REMOVAL PROCEDURE
1. Remove the 2 screws (2) that retain the tail lamp (1).
2. Pull the tail lamp (1) rearward in order to access the turn signal, the backup and the tail/stop lamp bulb sockets.
3. Twist the turn signal lamp bulb socket (2) counterclockwise and remove the socket from the tail lamp (1).
4. Remove the turn signal lamp bulb from the bulb socket (2), if necessary.
5. Twist the backup lamp bulb socket (3) counterclockwise and remove the socket from the tail lamp (1).
6. Remove the backup lamp bulb from the bulb socket (3), if necessary.
7. Twist the tail/stop lamp bulb socket (5) counterclockwise and remove the socket from the tail lamp (1).
8. Remove the tail/stop lamp bulb from the bulb socket (5), if necessary.
9. Disconnect the tail lamp electrical connector (4).
10. Remove the tail lamp (1) from the vehicle.
INSTALLATION PROCEDURE