Tracker 4WD V6-2.5L VIN 4 (2001)
Notice: Refer to Fastener Notice in Service Precautions.
Notice: Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.
1. Install the power steering gear inlet hose and the 2 gaskets to the power steering pump.
2. Install the hose fitting in order to retain the hose to the pump.
-
Tighten the fitting to 60 Nm (43.5 ft. lbs.).
3. Install the power steering gear inlet hose (6) and the 2 gaskets to the steering gear.
4. Install the fitting (5) in order to retain the hose to the gear.
-
Tighten the fitting to 35 Nm (25.5 ft. lbs.).
Notice: Refer to Using Proper Power Steering Fluid Notice in Service Precautions.
5. Add power steering fluid to the reservoir (6). Refer to Checking and Adding Power Steering Fluid.
Notice: Refer to Air In The Steering System Notice in Service Precautions.
6. Bleed the power steering system. Refer to Bleeding the Power Steering System.