Tracker 4WD V6-2.5L VIN 4 (2001)
the antiseize coating prior to installation. If the sensor was removed and is being reinstalled, an antiseize compound must be applied to the threads
before installation.
1. Install HO2S 1(2) to the exhaust manifold (1) with the J 29533-A/BT-8127, J 39194-B, or an equivalent.
Tighten
Tighten HO2S sensor to 45 N.m (32 lb ft).
2. Connect the HO2S 1 electrical connector.