Tracker 4WD V6-2.5L VIN 4 (2001)
INSTALLATION PROCEDURE
1. Install the PCM bracket (2) underneath the instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Secure the PCM bracket (2) with the 4 bolts (1).
Tighten
Tighten the PCM bracket bolts to 10 N.m (89 lb in).
3. Install the PCM (4) into the PCM bracket (2).
4. Secure the PCM to the PCM bracket with the 2 bolts.
Tighten
Tighten the PCM retaining bolts to 10 N.m (89 lb in).
5. Connect the four PCM electrical connectors.
Powertrain Control Module (PCM) Description
6. Install the PCM cover (1) and secure with the two plastic retainers.
7. Enable the SIR system. Refer to Disabling the SIR System.
8. Connect the negative battery cable.
