Tracker 4WD V6-2.5L VIN 4 (2001)
3. Depress the clutch pedal (2) to within 20 - 30 mm (0.8 - 1.2 inch) from the floor (1).
Notice: Refer to Fastener Notice in Service Precautions.
4. Screw the CPP switch (3) clockwise into the brake pedal bracket (3) until continuity is obtained.
^
Tighten the CPP switch lock nut to 13 Nm (115 inch lbs.).
5. Install the CPP switch electrical connector to the CPP switch (3).
6. Install the negative battery cable.
