Tracker 4WD V6-2.5L VIN 4 (2001)
4. Install the fuel pressure regulator (1) into the fuel rail (2).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Secure the fuel pressure regulator to the fuel rail with the two bolts (2).
Tighten
Tighten the bolts to 10 N.m (89 lb in).
6. Connect the vacuum line (1) to the fuel pressure regulator.
7. Connect the battery.
8. Turn ON the ignition, leaving the engine OFF.
9. Turn ON the fuel pump with the scan tool.
10. Check for fuel leaks and repair as necessary.
