Tracker 4WD V6-2.5L VIN 4 (2001)
1. Install a new fuel sender assembly gasket (2).
2. Install the fuel sender assembly (1) into the fuel tank.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Secure the fuel sender assembly (1) with the 6 bolts (3).
Tighten
Tighten the bolts to 5 N.m (60 lb in).
4. Connect the return fuel line (1) to the fuel sender assembly.
5. Connect the fuel supply line (2) to the fuel sender assembly.
6. Connect the electrical connector (4) to the fuel sender assembly.
7. Install the fuel tank.
8. Inspect for any fuel leaks. Repair as necessary.