Tracker 4WD V6-2.5L VIN 4 (2001)
3. Secure the MAP sensor to the intake plenum with the 2 bolts (1).
Tighten
Tighten the bolts to 3 N.m (26 lb in).
4. Connect the electrical connector (4) to the MAP sensor (1).
3. Secure the MAP sensor to the intake plenum with the 2 bolts (1).
Tighten
Tighten the bolts to 3 N.m (26 lb in).
4. Connect the electrical connector (4) to the MAP sensor (1).