Tracker 4WD V6-2.5L VIN 4 (2001)
1. Lubricate the CKP sensor O-ring with clean engine oil.
2. Install the CKP sensor (3) to the engine block.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Secure the CKP sensor to the engine block with the bolt (2).
Tighten
Tighten the bolt to 10 N.m (89 lb in).
4. Secure the sensor wire harness to the engine block with the clip and the bolt (1).
Tighten
Tighten the bolt to 10 N.m (89 lb in).
5. Connect the CKP sensor electrical connector.