Tracker 4WD V6-2.5L VIN 4 (2001)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Ring Replacement
Front
Wheel Speed Sensor Ring Replacement - Front
^
Tools Required
-
J39245 ABS Sensor Ring Installer
Removal Procedure
1. Remove the Front Wheel Hub.
2. Remove the ABS reluctor ring (1) from the wheel hub (2) by prying the ring away from the hub.
Installation Procedure
1. Using J39245, press the ABS reluctor ring (2) onto the wheel hub.
2. Install the Front Wheel Hub.
3. Perform Diagnostic System Check - ABS.
Rear
Wheel Speed Sensor Ring Replacement - Rear
Removal Procedure
1. Remove the rear axle shaft.