Tracker 4WD V6-2.5L VIN 4 (2001)
8. Remove the nut and the battery positive wire from the generator.
9. Remove the nut and the battery positive wire (2) from the starter.
10. Remove the starter upper mounting bolt (1) and remove the ground wire.
11. Remove the battery harness from the vehicle.
INSTALLATION PROCEDURE
1. Install the battery harness to the vehicle.
2. Install the starter upper mounting bolt (1) and the ground wire.
3. Install the battery positive wire to the starter (2). Secure with the nut.
4. Install the battery positive wire to the generator. Secure with the nut.
5. Install the harness clamp to the right engine mount. Secure with the bolt.