Tracker 4WD V6-2.5L VIN 4 (2001)
14. Measure the starter solenoid pull-in coil resistance between terminal S (2) and terminal M using the J 39200. If the resistance is greater than 5.0
ohms, the pull-in coil is open. Replace the starter solenoid.
15. Measure the starter solenoid hold-in coil resistance between terminal S (3) and the solenoid case (1) using the J 39200. If the resistance is greater
than 5.0 ohms, the hold-in coil is open. Replace the starter solenoid.
16. Inspect the pinion drive lever (4) for wear. Replace as necessary.
