Tracker 4WD V6-2.5L VIN 4 (2001)
16. Pull the overrunning clutch stop ring (4) towards the overrunning clutch assembly (1) and remove the overrunning clutch retaining ring (2).
17. Remove the overrunning clutch stop ring and overrunning clutch assembly from the gear shaft assembly.
18. Remove the internal gear from the gear shaft (3).
Starter Motor Overhaul-Assembly Procedure
1. Lightly grease the gear shaft with Lubriplate lubricant GM P/N 1050109, or the equivalent.
2. Install the internal gear to the gear shaft (3).
3. Install the overrunning clutch assembly and the overrunning clutch stop ring to the gear shaft assembly.
4. Install the overrunning clutch retaining ring to the gear shaft assembly. Slide the overrunning clutch stop ring (4) away from the overrunning clutch
assembly to cover the overrunning clutch retaining ring (2).