Tracker 4WD V6-2.5L VIN 4 (2001)
Power Steering Line/Hose: Service and Repair
Power Steering Gear Inlet Hose Replacement
Power Steering Gear Inlet Hose Replacement (2.5L)
Removal Procedure
1. Use a siphon in order to remove the power steering fluid from the reservoir (6).
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
Important: Place a drain pan under the vehicle in order to catch any escaping fluid.
2. Remove the power steering gear inlet hose fitting from the power steering pump.
3. Remove the power steering gear inlet hose and the 2 gaskets from the pump.
4. Remove the power steering gear inlet hose fitting (5) from the steering gear.
5. Remove the power steering gear inlet hose (6) and the 2 gaskets from the steering gear.
Installation Procedure
