Tracker 4WD V6-2.5L VIN 4 (2001)
15. Install the brake shield (1) to the spindle.
16. Install the 4 bolts to the brake shield.
-
Tighten the bolts to 50 Nm (36.5 ft. lbs.).
17. Install the wheel hub, the bearings, and the seals. Refer to Wheel Hub, Bearing, and Seal Replacement.
18. Install the brake rotor. Refer to Brake Rotor Replacement in Brakes and Traction Control.
19. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
20. Lower the vehicle.
21. Measure the wheel alignment. Adjust the alignment if necessary. Refer to Measuring Wheel Alignment.
