Tracker 4WD V6-2.5L VIN 4 (2001)
7. While lowering the floor jack, remove the coil spring (2).
Installation Procedure
Notice: Care should be taken to avoid chipping or scratching the coating when handling the suspension coil spring. Damage to the coating can cause
premature failure.
Important: The top of the coil spring is narrower than the bottom of the coil spring.
1. Install the coil spring (2). Install the narrower diameter end to the upper spring seat (1) and the larger diameter end to the lower control arm.
2. Raise the lower control arm (4) with a jack.