TrailBlazer 2WD L6-4.2L VIN S (2003)
9. Install the brake caliper assembly.
10. Install the tire and wheel assembly.
11. Lower the vehicle. Refer to Vehicle Lifting.
Caution: Refer to Firm Brake Pedal Caution in Service Precautions.
Caution: Do not move the vehicle until a firm brake pedal is obtained. Failure to obtain a firm pedal before moving vehicle may result in
personal injury.
12. Pump the brake pedal slowly and firmly in order to seat the brake pads.
Rear
Brake Caliper Bracket Replacement- Rear
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Inspect the brake caliper assembly.
Notice: Support the brake caliper with heavy mechanics wire, or equivalent, whenever it is separated from it's mount and the hydraulic flexible brake
hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may
cause damage to the brake hose and in turn may cause a brake fluid leak.
4. Remove the rear brake caliper assembly, relocate the brake caliper to the side.
5. Inspect the brake pads.
