TrailBlazer 2WD L6-4.2L VIN S (2003)
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the rear brake caliper on the mounting bracket.
^
Tighten the brake caliper mounting bolts to 31 Nm (23 ft. lbs.).
6. Install the NEW metal (copper) gaskets on the brake hose bolt.
7. Remove the plug from the brake hose end.
8. Install the brake hose bolt on the rear brake caliper.
^
Tighten the brake hose bolt to 44 Nm (33 ft. lbs.).
9. Bleed the hydraulic brake system.
10. Install the tire and wheel assembly.
11. Lower the vehicle. Refer to Vehicle Lifting
