TrailBlazer 2WD L6-4.2L VIN S (2003)
12. Disconnect the radiator side panels from the shroud (1).
13. Remove the radiator.
14. Remove the bolts retaining the condenser to the radiator.
Installation Procedure
1. Install the condenser to the radiator.
NOTICE:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the bolts retaining the condenser to the radiator.
Tighten the bolts to 28 Nm (21 ft. lbs.).
3. Install the radiator.
4. Install the cooling fan and shroud.
5. Raise the vehicle.