chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 2176 > < Disabling and Enabling|Page 2174
Page 4
background image

6. Remove the CPA from the IP module yellow 4-way connector (1) located behind the IP support.
7. Disconnect the IP module yellow 4-way connector (1) located behind the IP support.

Zone 6

1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.

IMPORTANT:  Refer to SIR Disabling and Enabling Zones before disabling the SIR system.

2. Turn OFF the ignition.
3. Remove the key from the ignition.

4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Remove the RF door trim panel.

Disabling and Enabling|Page 2176 > < Disabling and Enabling|Page 2174