chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling and Enabling|Page 2179 > < Disabling and Enabling|Page 2177
Page 7
background image

11. Remove the CPA from the RF side impact module yellow 2-way connector (1) located under the passenger seat.
12. Disconnect the RF side impact module yellow 2-way connector (1) located under the passenger seat.

13. Remove the CPA from the LF side impact module yellow 2-way connector (1) located under the driver seat.
14. Disconnect the LF side impact module yellow 2-way connector (1) located under the driver seat.

Zone 9

1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.

IMPORTANT:  Refer to SIR Disabling and Enabling Zones before disabling the SIR system.

2. Turn OFF the ignition.
3. Remove the key from the ignition.

4. Remove the SIR fuse from the fuse block (1) located in the underhood fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

Disabling and Enabling|Page 2179 > < Disabling and Enabling|Page 2177