TrailBlazer 2WD L6-4.2L VIN S (2003)
4. Loosen the lower control arm adjustment bolts (1).
Adjust the caster and the camber angle by repositioning the lower control arm (2) until the specifications have been met.
5. When the adjustments are complete, hold the lower control arm in position so that the specifications do not change while tightening the lower
control arm adjustment bolts.
TIGHTEN
^
Front lower control arm bracket mounting bolts to 260 Nm (192 lb ft).
^
Rear lower control arm bracket mounting bolts to 240 Nm (177 lb ft).
6. Verify that the caster and the camber are still within specifications.
When the caster and camber are within specifications, adjust the toe.
Front Wheel Toe Adjustment
Front Toe Adjustment
1. Loosen the jam nut on the outer tie rod (2).
Notice: Care must be taken that the boots are not: twisted when rotating the inner tie rods, or damage to the boots may result.
2. Rotate the inner tie rod (1) to the required toe specification setting.
3. Tighten the jam nut on the outer tie rod.
Tighten the outer tie rod jam nut to 75 Nm (55 ft. lbs.).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
