TrailBlazer 2WD L6-4.2L VIN S (2003)
4. Connect the chassis fuel feed pipe (3) to the fuel filter.
5. Connect the engine chassis fuel return pipe (1) to the fuel tank fuel return pipe.
6. Connect the chassis EVAP purge pipe (2) to the EVAP canister (1).
7. Use the following procedure with two wheel drive (2WD):
7.1.
Position the EVAP/fuel hose/pipe assembly against the transmission and install the retaining bolt (3) through the EVAP/fuel hose/pipe
assembly strap into the transmission.
