TrailBlazer 2WD L6-4.2L VIN S (2003)
Tail Light Bulb: All Technical Service Bulletins
Lighting - Tail Lamp(s) Inoperative
Bulletin No.: 03-08-42-006B
Date: May 26, 2004
INFORMATION
Subject:
Tail Lamp Circuit Board Now Available For Service Use
Models:
2004 Buick Rainier
2002-2004 Chevrolet TrailBlazer, TrailBlazer EXT
2002-2004 GMC Envoy, Envoy XL
2002-2004 Oldsmobile Bravada
Supercede:
This bulletin is being revised to add a part number. Please discard Corporate Bulletin Number 03-08-42-006A (Section 08 - Body and Accessories).
A new tail lamp circuit board is now available for service use.
If normal diagnosis of a vehicle leads to a failed tail lamp bulb, inspect the bulb socket to ensure proper fit of the bulb into the socket. If the bulb is
found to be loose, or if the circuit board has failed, replace both tail lamp circuit boards with the new part number from GMSPO.
Technicians are to replace the tail lamp circuit boards, on both sides of the vehicle, using the following procedure:
1.
Remove the tail lamp assembly from the vehicle.
2.
Remove the tail lamp circuit board from the tail lamp assembly.
3.
Inspect for loose tail lamp bulbs in the tail lamp circuit board. Replace the tail lamp bulb and the tail lamp circuit board if necessary.
4.
Install the tail lamp circuit board.
5.
Install the tail lamp assembly.
6.
Replace the tail lamp circuit board on the opposite side of the vehicle using the above procedure.
7.
Verify the operation of the tail lamps.
Parts Information
