TrailBlazer 2WD V8-5.3L (2007)
Skid Plate: Service and Repair
Engine Protection Shield Replacement
Engine Protection Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the engine shield mounting bolts.
3. Remove the engine shield.
Installation Procedure
1. Install the engine shield.
Notice: Refer to Fastener Notice.
2. Install the engine shield mounting bolts.
Tighten the engine shield mounting bolts to 20 N.m (15 lb ft).
3. Lower the vehicle.