TrailBlazer 2WD V8-6.0L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the master cylinder nuts (1) and tighten the nuts to 36 Nm (27 lb ft).
4. Connect the master cylinder secondary brake pipe fitting (1) and tighten the fitting to 32 Nm (24 lb ft).
5. Connect the master cylinder primary brake pipe fitting (2) and tighten the fitting to 32 Nm (24 lb ft).
6. Connect the master cylinder fluid level sensor electrical connector.
7. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).