TrailBlazer 2WD V8-6.0L VIN H (2006)
Speaker: Service and Repair
Front Upper
SPEAKER REPLACEMENT - FRONT UPPER
REMOVAL PROCEDURE
1. Remove the trim pad.
2. Remove the 3 screws that retain the speaker to the instrument panel (IP) substrate.
IMPORTANT: Ensure that the speaker electrical connector does not fall into the speaker opening.
3. Disconnect the speaker electrical connector.
4. Remove the speaker from the IP.
INSTALLATION PROCEDURE
1. Install the speaker to the IP.
2. Connect the speaker electrical connector.
3. Install the 3 speaker retaining screws.
Tighten the screws to 2 N.m (18 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.