TrailBlazer 2WD V8-6.0L VIN H (2006)
1. Install the rear seat cushion bracket to the seat cushion bottom with the 4 mounting nuts (2).
NOTE: Refer to Fastener Notice .
Tighten the rear seat cushion bracket mounting nuts to 25 N.m (18 lb ft).
2. Install the rear seat bracket trim covers (1).
3. Install the seat in the vehicle.
Seat Cushion Bracket Replacement - Rear No. 1 (TrailBlazer, Envoy, Rainier)
Seat Cushion Bracket Replacement - Rear No. 1 (TrailBlazer, Envoy, Rainier)
Removal Procedure
1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the 2 bolts securing the bracket assembly to the seat cushion.
3. Remove the bracket assembly from the seat cushion.
Installation Procedure
1. Position the bracket assembly on the seat cushion.