TrailBlazer 2WD V8-6.0L VIN H (2006)
Seat Cushion Pull Strap Replacement - Rear No. 1 (TrailBlazer, Envoy, Rainier)
Removal Procedure
1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the rear-seat cushion cover and the pad.
3. Remove the strap (1) from the rear seat cushion latch (2).
Installation Procedure
1. Install the small loop (1) onto the rear seat cushion latch (2).
2. Install the strap through the opening in the seat pan.
3. Install the rear-seat cushion cover and the pad.
4. Install the rear seat cushion assembly to the vehicle.
Seat Cushion Replacement - Rear No. 1
SEAT CUSHION REPLACEMENT - REAR NO. 1
REMOVAL PROCEDURE
1. Remove the rear seat bracket trim cover.
2. Remove the hydraulic jack from the jack stowage area, on the left side only.
3. Position the seat cushion assembly in order to gain access to the 2 rear seat mounting nuts.