TrailBlazer 2WD V8-6.0L VIN H (2006)
1. If the brake caliper guide pin is to be reused, clean the brake caliper guide pin using denatured alcohol, or equivalent.
2. Dry the brake caliper guide pin using non-lubricated, filtered air.
3. Apply high temperature silicone brake lubricant to the brake caliper guide pin. DO NOT apply lubricant to the brake pad hardware.
4. Install the front brake caliper to the mounting bracket.
Notice: Refer to Fastener Notice in Service Precautions.
Important: Tighten the leading bolt, closest to the bleed screw, first.
5. Install the front brake caliper guide pins bolts.
^
Tighten the front brake caliper guide pin bolts to 64 Nm (47 ft. lbs.).
Important: DO NOT reuse the metal/copper gaskets. Use only new copper gaskets.
