TrailBlazer 2WD V8-6.0L VIN H (2006)
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the rear brake caliper on the mounting bracket.
^
Tighten the brake caliper guide pins to 31 Nm (23 ft. lbs.).
6. Install the NEW copper gaskets on the brake hose bolt.
7. Remove the plug from the brake hose end.
8. Install the brake hose bolt on the rear brake caliper.
^
Tighten the brake hose bolt to 40 Nm (30 ft. lbs.).
9. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) Hydraulic Brake System Bleeding (Pressure).
10. Install the tire and wheel assembly.
11. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
