chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Park Brake Cable Replacement|Page 11639 > < Park Brake Cable Replacement
Page 2
background image

7. Remove the shield for the fuel tank. 
8. Remove the rear support bracket from the fuel tank.

9. Lower the fuel tank to allow access to the rear park brake cable retainer above the fuel tank.

Important:  When performing this service procedure, the fuel tank will only drop about four inches when supported by the pole jack. It is not
necessary to lower the fuel tank any further than that.

10. Remove the park brake cable retaining nuts from the underbody mounting studs.

11. Remove the park brake cable from the park brake cable retainers, left rear shown.

12. Remove the park brake retaining bracket bolt from the frame.
13. Remove the park brake retainer from the frame, left rear shown.

Park Brake Cable Replacement|Page 11639 > < Park Brake Cable Replacement