TrailBlazer 2WD V8-6.0L VIN H (2006)
5. Install J 41476 to the front cover.
6. Align the tapered legs of J 41476 with the machined alignment surfaces on the front cover.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the crankshaft balancer bolt until snug. Do NOT over tighten.
1. Tighten the oil pan to front cover bolts to 25 Nm (18 ft. lbs.).
2. Tighten the engine front cover bolts to 25 Nm (18 ft. lbs.).
8. Remove J 41476.
9. Install a NEW crankshaft front oil seal.
10. Install the water pump.
11. Install the A/C compressor and bracket.