TrailBlazer 2WD V8-6.0L VIN H (2006)
Heat Shield: Service and Repair
Exhaust Manifold Heat Shield Replacement - Right
Exhaust Manifold Heat Shield Replacement - Right
Removal Procedure
1. Remove the spark plugs.
2. Remove the heat shield bolts and the shield from the exhaust manifold.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the heat shield and the bolts to the exhaust manifold.
^
Tighten the bolts to 9 Nm (80 inch lbs.).
2. Install the spark plugs.