TrailBlazer 2WD V8-6.0L VIN H (2006)
1. Install the MAF/IAT sensor (3) to the air filter element (6).
2. Install the air filter element (6) and MAF/IAT sensor (3) to the lower air cleaner housing/washer solvent tank assembly (4).
3. Install the air cleaner cover (2) and secure with 4 retaining screws (1).
NOTE: Refer to Fastener Notice.
IMPORTANT: Ensure the air inlet duct (5) is properly positioned in the lower air cleaner housing/washer solvent tank assembly (4) before installing
the air cleaner cover (2).
Tighten the screws to 4 N.m (35 lb in).
4. Install the radiator support diagonal brace.
5. Connect the MAF/IAT sensor electrical connector (1).
6. Install the air cleaner outlet duct.
